Description
Modern and Robust
AIR Flush Portlights are meant to be installed on a fixed acrylic, Polycarbonate (PC) or tempered glass by gluing it in place. It is possible to adapt the product to different thicknesses of the fixed glass and the minimum thickness is 8mm.
The new portlights comes with a bolt-set with specially made black anodized aluminium nuts, that aligns perfectly with the outer surface of the
glass panel, as well as countersunk, black-oxidized stainless-steel screws from
inside that aligns with the inner frame.
The bolted version can be installed on a fixed acrylic (PMMA) or Polycarbonate (PC) panel with a specially milled cut-out for the opening and fixing bolts. Just tighten the screws all the way to the bottom, and the portlight will position itself and align the glass with the outer surface.
AIR flush portlight are lighter and less bulky than other solutions on the market. The portlight glass is completely flushed to the fixed glass from the outside.
The frame is glued to the fixed glass is made of anodized aluminium, the window is made of a high grade acrylic glass. The hinges are friction hinges, which means that the lid stays open by itself. Hinges, opening knobs and the remaining components are made of composite and acidproof stainless steel.
Portlight are CE approved for all types of boats, all kinds of water (Design Category A) and for appliance location area IIb, III and IV.
* The standard portlight is adapted to be glued into a panel/glass nominal thickness 8 to 10 mm. Portlights can also be mounted into thicker +12mm panel/glass.
Model | X x Y x R (mm) | A | B | C |
150 |
214 x 150 x 20 (8-10mm) |
159.6 | 95.6 | 19.9 |
190 |
366 x 190 x 20 (8-10mm) |
308 | 132 | 19.2 |
190+ |
366 x 190 x 20 (+12mm) |
308 | 132 | 19.2 |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.